»
Tools »
Equipment/Machine »
Hot Air Gun »
Gordak-952C 2 in 1 Desoldering Station Hot Air heat Gun with SMD Soldering stationGordak-952C 2 in 1 Desoldering Station Hot Air heat Gun with SMD Soldering station
Main Features:
ESD safe by design,preventing damage due to static leakage delicate SMD components.
VFD color digital display, can autocephaly use, noninterference each other, have testing itself function and show the message to lead the worker to repair.
CPU controlled closed loop of sensor, 128 rank air amount adjust, rapid heating, precise and stable temperature, suitable for soldering and desolder ring surface mounted ICs. Such as QFP, PLCC, SOP, BGA etc.
Light handle. Especially suitable for mounting and reworking SMD components by hand, repair, soldering common and directly-inserted electronics and soldering under other special conditions.
Hot air station intelligent cooling system. Deferred air delivery after switch off upon completion of rework and automatically switch off power supply when temperature is below 100.
Use imported heating wire of long service life.
Technical Parameters:
Gordak 952C Soldering Station |
|||
Model |
Voltage |
Power Consumption |
Air Pump |
Gordak 952V |
110V/220V |
270W |
Membranous |
Hot Air Gun |
|||
Air Flow |
Pump Consumption |
Temp.Control |
Heater |
0.16-1.2 Nm3 h |
45W |
150-500 |
250W Metal |
Soldering Iron |
||||
Power Consumption |
Output Voltage |
Temp.Control |
Ground Resistance |
Heater |
60W |
24V AC |
200-480 |
<2ohms |
Ceramic Heating Element |
Special Note :
please do not forget to unscrew the screw which below the main station ,this is very important
if you didn't have use hot air /soldering station before